施樂s2011顯示004345原因
更新時間：2025/2/4 12:08:50,view:541施樂打印機s2011蘇州施樂打印機售后服務中心客服熱線69616769，蘇州施樂售后電話，施樂售后網點， 富士施樂S2011可以把節能關掉?, 施樂S2011開機定影不停工作, 富士施樂s2011搓紙輪但檢查未發現卡紙, 富士施樂s2011不進紙, 施樂s2011節電怎么一直在跳,維修視頻
施樂s2011顯示004345原因 大哥們是什么問題呢，給點指導啥謝謝 蘇州004345 HVPS Communication Error參考 BSD CH9.1ESS/MCU PWB 與 HVPS 之間出現通訊不良。原因 / 處理1. 關閉后再打開電源。2. 關閉電源， 檢查 HVPS J500 到 ESS/MCU PWB J402 之間電線的斷線、 短路或接觸不良。3. 檢查后若無問題， 則依序更換下列零件。· HVPS (PL18.1)· ESS/MCU PWB (PL18.1)意思是高壓板或主板吧
施樂2011打印重影 davexue 2021/11/27 蘇州施樂2011售后維修服務中心地址查詢 004-345MCU/HVPS Communication Fail.SOLUTION:
1.Check 5 VDC from P/J 574-5 to P/J 574- 4 on the HVPS Control PWB
2.Disconnect P/J 574.Is there 5 VDC from J 574-5 to J 574-4
3.Check the wire from J411-5 to J574-5 for a short circuit to ground
4.Switch off the power,check these wires for an open, short circuit to ground for the following:
5.HVPS Control PWB P/J574-9 to MCU PWB P/J411-1
6.HVPS Control PWB P/J574-8 to MCU PWB P/J411-2
7.HVPS Control PWB P/J574-7 to MCU PWB P/J411-3
8.HVPS Control PWB P/J574-6 to MCU PWB P/J411-4
9.Check for open circuit, loose connections in the 5 VDC supply wires between P/J411, pins 5,6;,P/J574, pins 5,4.
10.If this does not resolve the problem, replace the HVPS Control PWB & Engine control Board
技術 GUILING17131720 發表于 2024/8/23 側門開關的問題
施樂2011打印重影 davexue 2021/11/27 蘇州施樂2011售后維修服務中心地址查詢 004-345MCU/HVPS Communication Fail.SOLUTION:1.Check 5 VDC from P/J 574-5 to P/J 574- 4 on the HVPS Control PWB
2.Disconnect P/J 574.Is there 5 VDC from J 574-5 to J 574-4
3.Check the wire from J411-5 to J574-5 for a short circuit to ground
4.Switch off the power,check these wires for an open, short circuit to ground for the following:
5.HVPS Control PWB P/J574-9 to MCU PWB P/J411-1
6.HVPS Control PWB P/J574-8 to MCU PWB P/J411-2
7.HVPS Control PWB P/J574-7 to MCU PWB P/J411-3
8.HVPS Control PWB P/J574-6 to MCU PWB P/J411-4
9.Check for open circuit, loose connections in the 5 VDC supply wires between P/J411, pins 5,6;,P/J574, pins 5,4.
10.If this does not resolve the problem, replace the HVPS Control PWB & Engine control Board
熱門圖文