施樂7780彩機出代碼093-315
更新時間：2025/1/21 20:12:06,view:137施樂打印機7780蘇州施樂打印機售后服務中心客服熱線69616769，蘇州施樂售后電話，施樂售后網點，
施樂7780彩機出代碼093-315,維修手冊,技術資料，093-315 RAP
BSD-ON:9.15 Toner Dispense Control (1 Of 3) BSD, CH9.16
Magenta Dispense failure.
Procedure
Enter the Diagnostics. Enter DC330 [093-007] (Magenta Dispense Motor). Start. Dispense
Motor is heard rotating. (ON duration is 2 sec.)
Y N
Open the PWB Chassis. (REP2.1.1) 24VDC is measured between P/J430-8 () on
the IOT PWB ， GND (-).
Y N
Refer to BSD CH2.2, check the 24VDC circuit to P/J430-6 on the IOT PWB.
Turn off the power. Disconnect Connectors P/J201M on the Dispense Motor. Measure
the wire-wound resistance of the Dispense Motor. The resistance between P/J201M-1
， -2 pins is between 22.0 ， 27.0 ohms.
Y N
Replace the Magenta Dispense Motor (PL6.4).
Check the following for continuity:
IOT PWB P/J436-A12 to Dispense Motor P/J201M-1
IOT PWB P/J436-A11 to Dispense Motor P/J201M-2
Every resistance is 1 ohm ， less.
蘇州施樂打印機維修站電話696l6769，維修，售后服務
BSD-ON:9.15 Toner Dispense Control (1 Of 3) BSD, CH9.16
Magenta Dispense failure.
Procedure
Enter the Diagnostics. Enter DC330 [093-007] (Magenta Dispense Motor). Start. Dispense
Motor is heard rotating. (ON duration is 2 sec.)
Y N
Open the PWB Chassis. (REP2.1.1) 24VDC is measured between P/J430-8 () on
the IOT PWB ， GND (-).
Y N
Refer to BSD CH2.2, check the 24VDC circuit to P/J430-6 on the IOT PWB.
Turn off the power. Disconnect Connectors P/J201M on the Dispense Motor. Measure
the wire-wound resistance of the Dispense Motor. The resistance between P/J201M-1
， -2 pins is between 22.0 ， 27.0 ohms.
Y N
Replace the Magenta Dispense Motor (PL6.4).
Check the following for continuity:
IOT PWB P/J436-A12 to Dispense Motor P/J201M-1
IOT PWB P/J436-A11 to Dispense Motor P/J201M-2
Every resistance is 1 ohm ， less.
蘇州施樂打印機維修站電話696l6769，維修，售后服務
熱門圖文