科美751出代碼c-3803
更新時間：2025/1/24 22:47:15,view:222打印機751蘇州打印機售后服務中心客服熱線69616769，蘇州客服中心電話，打印機蘇州維修部，打印機蘇州廠家電話， 科美機器顯示檢查打印機模式, 科美c200.出代碼c-3723, 科美1690報clearBYcover, 科美7718錯誤C2258, 科美363復印機出現c2558,維修視頻
蘇州751售后維修電話696l6769,維修
C3803 ERROR problem with the fusing unit. This is the assembly that gets hot and "fuses" the toner onto your paper. This error code means that the fusing unit did not warm up properly. You will need to have a service company come out to diagnose and repair the problem then reset this code as service mode entry is required in order to reset. It could be as simple as cleaning the thermistor, replacing the thermistor, thermal fuse etc. I would estimate the cost at around $200.00.
Here is the section from the service manual that deals with this code:
Thermistor /1 (TH1) detects a low
temperature when a specified
period of time elapses after the
fusing heater lamp is turned ON
for the fusing ON control.科美751出代碼c-3803
C3803 ERROR problem with the fusing unit. This is the assembly that gets hot and "fuses" the toner onto your paper. This error code means that the fusing unit did not warm up properly. You will need to have a service company come out to diagnose and repair the problem then reset this code as service mode entry is required in order to reset. It could be as simple as cleaning the thermistor, replacing the thermistor, thermal fuse etc. I would estimate the cost at around $200.00.
Here is the section from the service manual that deals with this code:
Thermistor /1 (TH1) detects a low
temperature when a specified
period of time elapses after the
fusing heater lamp is turned ON
for the fusing ON control.科美751出代碼c-3803
網友相關回復如下：（以下網友回復只代表網友個人觀點，不代表蘇州打印機售后服務網觀點）
熱門圖文